Sunlu HS Matte PETG 1KG

• Printing temp: 230 C – 270 C
• Bed temp: 70 C – 80 C
• Empty spool weight: 215 g (cardboard core alone: 30 g)
• Advertised filament weight: 1000 g
• Outside Diameter: 210 mm
• Height: 66 mm
• Hole Diameter: 54 mm

• Speed dependent temps: 230-240 C at 50-100 mm/s, 240-255 C at 100-300 mm/s, 255-270 C at 300-600 mm/s
• Spool temperature resistance: <70 C
• Filament end secured with tape — no waste when finishing the spool